Zahn Cups Supplier and Dealer in India
Zahn Cups
Zahn Cups can be used to quickly measure the viscosity of liquids such as Paint, Ink, Varnishes, Syrup, and Oil. They are Z-produced according to ASTM D 816, ASTM D 1084, and ASM D 4212. The Stainless Steel Cups are molded precisely and the orifices are precision drilled using high-speed CNC drilling.
Each cup has a 12-inch loop handle to allow the cup to be dipped by hand into a liquid container. At the center of this handle is a finger ring for holding the cup in a vertical position during use. Their orifice diameters are set at the factory for appropriate results with applicable NIST traceable Newtonian oils.
It is done by filling up the volume of the Zahn Cup with the required liquid and then placing an index finger over the orifice to stop any flow out of the liquid. A ring at the Zahn Cup handle allows the cup to be hanged perpendicularly still with the finger stopping any liquid flow out. Prepare a Digital stopwatch and set zero. Immediately start the stopwatch when the finger is released. As soon as there is a first break of the flow, stop the stopwatch. The second shown is the time of the liquid flow, which is also the flow viscosity of that liquid.
Results should be reported in Zahn-Seconds at a specified temperature for a particular cup. To convert Zahn- Seconds to centistokes, refer to ASTM D 4212, D816, D1084, Every Biuged s Zahn cup has its coefficient k , which is marked on the cup body. Fact Viscosity=Testing viscosity K
Centistokes Specific Gravity= Centipoise
Every Biuged s Zahn cup has its coefficient k, which is marked on the cup body. Fact Viscosity=Testing viscosity K
Main Technical Parameters:
The volume of Cup: | 43ml ~49ml |
Length of Handle: | 40±0.1mm |
Height of Cup: | 58±0.1mm |
Measurement Temperature: | 25°C ±1°C |
Come with a calibration certificate |