yjhv

Small Xenon Test Chamber Supplier and Dealer in India

Small Xenon Test Chamber
Send Enquiry

Main Technical Parameters:

  • Xenon Lamp: one 1.8KW xenon lamp imported from America
  • Filter: Daylight filter (Also can choose extended UV filter or window
    glass filter)
  • Lamp Lifetime: Near 1,500 hours
  • Exposure Area: 1,000 cm2 (can put 9 standard samples 150 × 70mm) *
  • Adjustable Irradiance Range: 30W/m2 ~100 W/m2 (300-400nm)
    or 0.3W/m2 ~0.8 W/m2 (@340nm) or 0.5W/m2 ~ 1.5 W/m2 (@420nm) * Adjustable Black Panel Temperature Range: RT+20°C ~90°C
    (Depends on environment temperature and setting irradiance value)
  • Interior Material of Chamber: Stainless steel -SUS 304 material
  • Exterior Material of Chamber: Powder coating
  • Overall Size: 1000mm x 650mm x 1020mm
  • Weight: 135KG (176KG Gross weight)
  • Power Supply: 220V 50/60HZ (Alternative) Max Current: 12A
  • Max.Power: 2.5 kW
  • Ordering Information:
    BGD 866/A—Small Xenon Test Chamber BGD 8156—American Xenon Lamps (1.8 kW) BGD 8170—Pure Water Machine (50L/h) (See page161 for Xenon Calibration Radiometer)

Small Xenon Test Chamber

Compared with BGD 865, BGD 866 adds spray function. Spray function is used to simulate rain and humidity when the Cmaterial is used at outdoor. Furthermore, operator can set the cumulative energy Total irradiance energy obtained by
sample to stop a test procedure.

The operator can set all required test parameters Irradiance, test time, BPT, etc through the touch screen, and can check
its running status at any time. All running parameters can be exported to the computer through the USB interface.

Small Xenon Test Chamber Characters

  • The test procedures can be programmed freely; and up to 16 predetermined procedures can be saved in one time. Every
    procedure includes up to 10 segments setting data.
  • Can set the cumulative energy total irradiance energy obtained by sample to finish a test procedure.
  • With spray function, can set spray time and spray interval time.
  • The xenon light source corresponds with international standards; ensuring reproducibility and comparability of testing results.
  • Irradiance energy can be accurately controlled. The “Closed-Loop” control system can automatically compensate for the change in light intensity caused by aging or other factors.
  • Users can easily calibrate and adjust the irradiance or the black panel temperature by themselves.
  • With High precision Pt100 Temperature sensor. Black panel temperature is auto-controlled during the whole process Show the relative humidity of working room
  • Alarm function for protection: Over temperature of BPT, big error for irradiance, auto shut-down protection when opening door protection for too low air pressure
  • Touch screen and user-friendly operation interface allow operator to set the test parameters and monitor all the test process easily.
  • Specimen mounting and evaluation is fast and easy With unique slide-out specimen tray
  • Real-time data can be collected and recorded. The incidental USB connector allow users to copy the test data into a USB drive, achieving unattended operation.